hypoid gear
英
美
n. 偏轴伞齿轮；准双曲面（大）齿轮；准双曲面（直角交错轴双曲面）齿轮
双语例句
- Taking the case of product family design of NC spiral bevel and hypoid gear generator, design method and course were analysed around fundamental principles of product family design.
围绕产品族设计的基本思想，以数控弧齿铣齿机产品族设计为例，分析了产品族设计的方法与过程。 - Hypoid gear; Machine-tool settings; Local synthesis;
准双曲面齿轮；加工参数；局部综合； - Hypoid gear; Contact analysis; Friction; Mathematical programming;
准双曲面齿轮；接触分析；摩擦；数学规划； - Influences of hypoid gear quality on rear axle noise
螺旋锥齿轮质量对后桥总成噪声的影响 - Edge Detection and 3-D Digitalization of the Hypoid Gear Contact Spot
准双曲面齿轮接触斑点边界提取及其三维数字化 - Hypoid gear; Tooth contact; Edge contact;
准双曲面齿轮；轮齿接触；边缘接触； - The integral type housing, hypoid gear design has the centerline of the pinion set above the centerline of the ring gear.
集成型的差速室、准双曲面齿轮的设计中，小齿轮组中心线在环形齿轮的中心线之上。 - Function-oriented Design and Theoretical Verification of Point-contact Tooth Surfaces of the Hypoid Gear Drive with the Formate Gear
成形法大轮准双曲面齿轮传动点啮合齿面主动设计与理论检验 - New Design Method to Hypoid Gear of High Strength
高强度准双曲面齿轮的新设计方法 - Design Theory and Experiments of Hypoid Gear with High Tooth
高齿准双曲面齿轮的设计方法与试验研究 - By processing and analysis of test data, influence degree of different factors is obtained, and the optimum formulation of high-duty hypoid gear lubricant of automotive drive shafts is obtained too.
通过对试验数据的处理和分析，得出各因素对试验指标的影响程度，并获得了满足在给定工况条件下的汽车驱动桥双曲线齿轮油的最佳配方方案。 - The intelligent check system proposed in this paper can be used as the final quality check and quality control tool in spiral bevel and hypoid gear manufacture process.
新型万能曲线齿锥齿轮加工机床的运动学本文提出的锥齿轮智能检测系统可在锥齿轮制造过程中用作最终质量检测和质量控制工具。 - The major works of this thesis are listed as follow: 1. The finite element model of the spiral bevel gear and hypoid gear tooth is established, the dynamic meshing property is analyzed combining with the mixed finite element method for contact problems.
建立了弧齿锥齿轮和准双曲面齿轮轮齿有限元分析模型，并结合动力接触有限元混合算法分析了轮齿的动态啮合性能。 - An optimum design method of hypoid gear is proposed;
提出准双曲面齿轮的优化设计方法。 - The Experimental Research on the Dynamic Behavior of Hypoid Gear System
准双曲面齿轮传动系统动态特性实验研究 - The CAD/ CAM Integration System of Hypoid Gear Blank
准双曲面齿轮齿坯CAD/CAM集成系统 - A new CAD/ CAM integration system about hypoid gear blank is introduced.
论述了准双曲面齿轮齿坯CAD/CAM集成系统的结构、功能及其原理。 - This paper presents effect of heat treatment process on peen shot strengthen ing performance of rear axle pinion gear and peen shot methods of hypoid gear, and also introduces the main structure features of peen shot machine for rear axle pinion gear.
讨论了热处理工艺对后桥主动锥齿轮强化喷丸效果的影响以及准双曲面螺旋锥齿轮强化喷丸方法，介绍了研制的后桥主动锥齿轮强化喷丸机的主要结构特点。 - The Design and Analysis to Hypoid Gear of High Speed Ratio
大速比准双曲面齿轮的设计与分析 - It is the important component part of automobile and engineering machine transmission system that Gleason helical bevel gear including spiral bevel gear and hypoid gear, its operating characteristic has the most important influence for entire transmission system.
螺旋锥齿轮包括弧齿锥齿轮和准双曲面齿轮是汽车和工程机械传动系统的重要组成部分，其工作性能对整个传动系统有着至关重要的影响。 - Analysis of edge contact for Hypoid Gear and spiral bevel gears
螺旋锥齿轮边缘接触分析 - The paper presents the leading characteristic of CNC Hypoid Gear Grinding Machine PHOENIX ⅱ of Gleason, and describes the modelling and kinematical analysis of axis B, which sets a theoretical foundation for the design of this kind of machines.
介绍了格里森PHOENIXⅡ数控螺旋锥齿轮磨齿机的主要特点，对其B轴运动进行建模及运动分析，为该类机床的结构设计提供了理论依据。 - In this paper, a simulating approach of tooth contact analysis for hypoid gear drives was presented, which can analyze the whole engagement process of hypoid gear, including the contacts on working surface and tooth edge.
本文推导了准双曲面齿轮传动的轮齿接触分析方法，包括齿面接触分析和边缘接触分析，代表了齿轮啮合的完整过程。 - The theory of calculating geometric parameters of pitch cone of curved tooth hypoid gear is investigated in this paper.
本文研究了曲齿准双曲面齿轮分度锥面几何参数计算的原理。 - The improvement and development of the hypoid gear ′ s machining parameter design method based on the local synthesis method show its strong points such as control ability and simplicity for calculation.
基于局部综合法的准双曲面齿轮加工参数设计方法，经过近几年来的改进和发展，已经显示出其可预控性以及计算简洁等优点。 - In order to analyze the results from practice conveniently and optimize machining adjustment parameters, the simulation of spiral bevel and hypoid gear grinded by flared cup wheel is achieved.
为方便分析实际加工的结果及实现机床调整参数的优化，对扩口杯砂轮磨削螺旋锥齿轮成形法大轮进行了加工模拟仿真。 - Nonlinear Dynamics of Spiral Bevel Gears and Hypoid Gear Drives
弧齿锥齿轮和准双曲面齿轮非线性动力学研究 - Dynamic emulate analysis of hypoid gear is operated with ANSYS/ LS-DYNA software. The contact stress and deformation during the meshing process are got. The distribution of contact force is calculated when two pairs of teeth contacting simultaneously.
利用ANSYS/LS-DYNA对准双曲面齿轮进行动力学接触仿真分析，计算了齿轮副在啮合过程中齿面接触应力、应变的变化情况及两对轮齿同时接触过程中接触压力的分布及边缘接触情况。 - The active design technique of hypoid gear tooth face provides a kind of fresh method of the hypoid gear design.
准双曲面齿轮齿面主动设计技术为准双曲面齿轮副的设计提供了一种全新的思路。 - Hypoid gear is a critical part which is widely used in automobile chassis transmission.
准双曲面齿轮是汽车底盘结构中广泛应用的关键传动构件。